| Author |
 Topic  |
|
|
siemens
Master
Netherlands
139 Posts |
 Posted - 01 May 2006 : 13:23:53
|
Hello,
I use 3.1 now for a few days and i discovered some strange behaviour.
When i have one page with only 1 picture and i use the 'Stencil' -
'ovalfade1.png' this stencil is not working, neither in preview or
when the page is exported.
I discovered that when i add one effect to this picture, for example
'Drop shadow' then it is working. Also one extra picture is created
in the 'files' directory after the export.
It is not really a big problem but maybe Lorenzi can fix this.
Gijs van W., The Netherlands. |
|
|
s.dav
Site Admin
Italy
3364 Posts |
Posted - 02 May 2006 : 09:23:21
|
Anyone experiences this problem?
I've tried in my two pc and all work ok...
Did you experiece this problem only with the ovalfade1 stencil? |
Regards, Davide |
 |
|
|
siemens
Master
Netherlands
139 Posts |
Posted - 02 May 2006 : 13:01:26
|
Hello,
I tested it with other stencils, all the stencils gives
me the same problem...
I tested it in preview mode and in the exported htm file.
I also tested it in Firefox and Internet Explorer.
All the same result, no stencil.
What could be the difference between yours and mine environment?
Gijs van W., The Netherlands |
|
|
|
siemens
Master
Netherlands
139 Posts |
Posted - 02 May 2006 : 13:36:32
|
Hello, back again....
I did some experiments and found the problem and also the solution!
When i doubleclick on the image i see the 'Picture properties'.
The 'Export options' is : Automatic (i think it is the default
setting).. when i change it to 'export to png' then it is working
good. Then the stencil is working in preview and export show htm.
I can also see that the image is now exported in the 'files' folder.
I don't know what te default setting is but now it is working...
Gijs van W., The Netherlands
|
Edited by - siemens on 02 May 2006 13:37:36 |
|
|
|
s.dav
Site Admin
Italy
3364 Posts |
Posted - 02 May 2006 : 19:30:08
|
:-( Very strange...
Can you send me a .dhe file with the picture that gives you the error so I can reproduce the problem?
Many thanks! |
Regards, Davide |
|
|
|
siemens
Master
Netherlands
139 Posts |
Posted - 03 May 2006 : 08:25:29
|
Yes, no problem.
|
|
|
|
s.dav
Site Admin
Italy
3364 Posts |
Posted - 03 May 2006 : 09:12:20
|
Found the problem ;-)
Many thanks!
In a few days I'll release the fix! |
Regards, Davide |
|
|
| |
Topic |
|
Strange behaviour when using a 'Stencil'
